Spray Nozzle LZ-6VO

The Spiral Target nozzle is an injection molded polypropylene unit consisting of two parts—the main body with integral target diffuser and a snap-on insert or orifice cap.

The orifice cap is available in 13 diameters ranging from .362 through 1.099. This amount of flexibility allows for a wide range of adjustment in water flow rates and basin water levels.

The Spiral Target nozzle is available in three lengths. The 2.625 nozzles are used on wood, steel, and fiberglass cooling towers where the basin support structure does not obstruct the release of water. The 4.875 nozzles are used on larger industrial wood and concrete cooling towers and on applications where clogging might be a concern. The 6.875 nozzles are used on towers where the release of the water has to clear obstructions within the tower structure.

In every application, the target portion of the nozzle should be located at the correct distance above the top of the cooling tower fill to obtain maximum water distribution over the fill area.

نحن ننصح دائما بإختيار أفضل رشاشات المياه الرذاذة لأبراج التبريد و كل 
الأجزاء الأخرى أيضا, حيث أن جميع تطبيقات برج التبريد تعتبر بيئات قاسية للغاية, 
حيث أنه يتم تثبيت مرشات الرذاذ في كثير من الأحيان في البيئات الرطبة
 جدا وبنسبة رطوبة تصل إلى 100 ٪.


 وهي متوفرة في السعودية - مجموعة محمد الشهري